I've not done a lot because my old workshop (shed) needed replacing due to rot and it's taken a while to get it replaced and to get the new one all sorted out. At last it's all sorted with my power tools all nicely stored on a shelf system whereby they are attached to the shelf. The shelf can then be slid out and securely bolted to the workbench. The system is quite a neat way of storage/use and works well. The workbench is also handmade out of a felled sycamore from work and took a bit of time to make. The legs are 2x3", support struts 2x3" and the top is about 50x26x2". In all it weighs quite a bit and is going nowhere when you hammer/drill/sand on it etc!
That aside, I managed to do a few bits of leatherwork when I was allowed to use the kitchen table!
My two lads and I took up archery last year. As a result I needed a bracer:
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/932f2df3-5fbf-4c90-8b89-077c03f6b7e3_zps19e50456.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/P7010007_3838_zps51eadd1b.jpg)
Then I needed a quiver:
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/P7190015_3828_zps2f4792b4.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/P7190017_3417_zps9c0c0fc1.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/P7190019_3419_zps14b7e1c2.jpg)
Then I needed a belt to use the quiver:
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0003_zpsdf8ec9e9.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0004_zps5ee60b48.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/485702a5-e7d6-422a-b2d0-2956c2d08532_zps5f69fa25.jpg)
Then I made a simple wrist sling;
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0010_zps6bdb7c15.jpg)
My two lads decided they wanted proper bracers (I'm just waiting for some Ecoflo dye to be delivered so I can finish them):
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0002_zpsf1a7e4e9.jpg)
Whilst I was making the quiver and then the bracers I repeatedly got fed up scrabbling for my tools that were just stored in a tool tray. Collecting some wood from work I cut, sanded and drilled a couple of tool racks.
The stamping/carving rack is made from a branch off a Yew that came down in last years snow and the punching rack is made from a small silver birch trunk that also came down last year.
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0009_zps832d1e79.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0008_zpsb0809659.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0006_zps12591e21.jpg)
![Image](http://i47.photobucket.com/albums/f189/Batmancaver/IMG_0007_zps69e16150.jpg)
Now that my workshop is eventually all sorted out I can get on with some knives this year
![Very Happy :D](./images/smilies/icon/biggrin.gif)