Page 1 of 6
Re: Distractions
Posted: Sun Mar 25, 2018 10:39 am
by slim
Stool number 2 now well on the way to being done, from the top is awaiting more coats of varnish then its finished, I took my time with this one & its much nicer all round ...... sold too as soon as I finish & deliver it
The bigger project is moving on but eating up a few quid, mainly that's going on the finish as I have a guy who may well want it (& pay good money) he's a picky bugger though so I'm taking my time ....... I hope to start assembling that in a few days so pics will come then
Re: Distractions
Posted: Thu Mar 29, 2018 2:01 pm
by slim
The latest two are 14" high, perfect for sitting on while working on the bike
Fully spinning tops too
Re: Distractions
Posted: Sat Mar 31, 2018 7:42 am
by slim
Sold !
Now who was it that had all those knackered engines ? =))
Re: Distractions
Posted: Sat Mar 31, 2018 8:28 am
by mike-rf600r
Well done sir ! Keep it up
Re: Distractions
Posted: Sat Mar 31, 2018 9:02 am
by slim
mike-rf600r wrote:Well done sir ! Keep it up
I'm trying to mate as it seems I have found a small niche
My problem now is I'm out of the bigger engine parts which is a bit of a bugger as I have orders for 2 more of the taller stools + bigger version as a table & a weirdo ashtray stand thing
There is a dead cbr engine that's mine but getting it here is complicated so I'm not holding my breath on that one, it could turn up tomorrow or in 3 months time
I really need a reliable source of dead engines or at least parts
Re: Distractions
Posted: Sun Apr 01, 2018 8:11 pm
by Old wobbler
What about posting on FB for scrap parts? MIght get you something.
Re: Distractions
Posted: Mon Apr 02, 2018 10:15 am
by slim
Old wobbler wrote:What about posting on FB for scrap parts? MIght get you something.
I don't do FB mate, hate it with a passion !
Re: Distractions
Posted: Mon Apr 02, 2018 11:57 am
by mike-rf600r
No local breakers your way mate ?
Re: Distractions
Posted: Mon Apr 02, 2018 12:00 pm
by mike-rf600r
Re: Distractions
Posted: Mon Apr 02, 2018 1:36 pm
by mike-rf600r
Re: Distractions
Posted: Mon Apr 02, 2018 1:40 pm
by mike-rf600r
Re: Distractions
Posted: Mon Apr 02, 2018 1:46 pm
by mike-rf600r
Actually he got loads cranks at 20 or best offer I’d be tempted to message him for a bundle price see if can do 6 for100 quid delivered or something.
Re: Distractions
Posted: Mon Apr 02, 2018 4:54 pm
by slim
I'm not doing it to make a fortune, its more something to do than anything else mate but cranks at 20 quid kills my small profit
I'll either have to put my prices up a lot or find a cheap supply of busted engines
Re: Distractions
Posted: Mon Apr 02, 2018 5:11 pm
by mike-rf600r
Must be selling them very cheap then mate.
Re: Distractions
Posted: Mon Apr 02, 2018 6:02 pm
by slim
mike-rf600r wrote:Must be selling them very cheap then mate.
Yes mate, way too cheap but they are going as quick as I can make them & I'm not having to stick them on ebay or advertise elsewhere which is worth a couple of quid to me
I'm only making about 20 quid out of the stools, its a lot of work for that but I enjoy it
Re: Distractions
Posted: Mon Apr 02, 2018 6:11 pm
by mike-rf600r
Ok well I’ll hate fine i do the same with exhausts sometimes. Often make small amounts on them but I turn them around soon as I get them so a quick 20-40 quid is great. Few of those soon adds up
However just saying don’t do yourself out of dosh especially if money tight. Don’t be too expensive but being too cheap is just as bad at times.
Keep up the good work thoUgh. :ymapplause:
Re: Distractions
Posted: Mon Apr 02, 2018 6:25 pm
by slim
Cheers mike I knew you would get it mate :-bd
I did the first one & a guy made an offer on it, I thought that's ok as it wasn't all that good, the next ones were much better but the precedent on price had been set & they shift fairly quickly so I'm happy enough
If I had enough scrap engines I could do it as a production line & cut down on the time spent a great deal but its not going to happen lol
Having said that I have one bigger ticket item almost done & that's cost not a lot in terms of parts, I hope to get a decent amount for my time on that & I have a couple of ideas for stuff I can make from all the leftover bits that will also only cost my time so I should see a few quid in the end
Re: Distractions
Posted: Mon Apr 02, 2018 6:56 pm
by Old wobbler
slim wrote:Old wobbler wrote:What about posting on FB for scrap parts? MIght get you something.
I don't do FB mate, hate it with a passion !
Well that told me.
Re: Distractions
Posted: Mon Apr 02, 2018 8:11 pm
by Old wobbler
What sort of engine bits do you want, slim?
Cranks, camshafts, valves, holed pistons?
Re: Distractions
Posted: Mon Apr 02, 2018 9:35 pm
by slim
Old wobbler wrote:What sort of engine bits do you want, slim?
Cranks, camshafts, valves, holed pistons?
Its mainly cranks & rods I am short of at the minute mate, cams, balancer shafts & any gearbox parts are always useful though
Pretty much anything steel & interesting shaped comes in useful eventually, I have even used old sprockets a few times now
Re: Distractions
Posted: Tue Apr 03, 2018 4:09 pm
by slim
Re: Distractions
Posted: Fri Jul 13, 2018 4:36 pm
by slim
Stuck this on ebay to make way for the next thing I started making today
Re: Distractions
Posted: Fri Jul 13, 2018 4:46 pm
by badanimal
:-bd
Re: Distractions
Posted: Fri Jul 13, 2018 5:17 pm
by slim
Would you believe I just sold it
I got an offer I couldn't refuse so well happy
Onwards & upwards with the next thing
Re: Distractions
Posted: Fri Jul 13, 2018 6:46 pm
by mike-rf600r
slim wrote:Would you believe I just sold it
I got an offer I couldn't refuse so well happy
Onwards & upwards with the next thing
Well done sir. I hope you actually started pricing things near the going rate this time. B-)